(Shown in screen shots below is the PRO 2500 UTV Motorcycle High Rise Lift Table which is the bike we used for this instructional piece. Remember - a longer loading ramp can really help with a larger or heavier bike. When the ramp is longer, there is less of a grade, making it a lot easier to roll your bike on it. You will also find you have more control over it as you are rolling it, since you will not have to put a lot of effort into pushing it "up hill" since the angle won't be as steep.
First prep the lift. Set up the front wheel vise so it is wide enough to accept the
front wheel for when you have loaded the bike.
Next, lower the lift completely and secure the ramp to the lift.
Connect your soft straps to the handlebars of the bike.
Set up the ratchet straps so they are the right length and place them in
close proximity to the front wheel vise.
close proximity to the front wheel vise.
With the bike ready and the lift ready, slowly load the bike onto the ramp.
We recommend using extra long ramps, especially if you have a longer / heavier bike,
as it makes the loading process a lot easier (see above for further explanation!).
as it makes the loading process a lot easier (see above for further explanation!).
Holding the front handlebars of the bike and secure the front wheel vise tightly.
Next, attach one of your straps to the lift and then to the soft straps on the bike.
Tighten the strap until there is tension.
Tighten the strap until there is tension.
Then
repeat on the other side, making sure the straps are even, and the bike
remains level. Tighten the straps enough to slightly compress the front
forks of the bike.
Your bike is now secure on the lift.
Visit http://www.nhproequip.com/pro-2500-48-high-rise-air-utv-motorcycle-lift-free-shipping to watch a video of the bike upload process. Call Clark for more info at 603-234-2612. Visit Clark Heintz Tools & Equipment, LLC at 1298 Rte 3A in Bow, NH. In business for 43 years.







