Wednesday, December 30, 2015

Loading your motorcycle onto a lift table safely

(Shown in screen shots below is the PRO 2500 UTV Motorcycle High Rise Lift Table which is the bike we used for this instructional piece. Remember - a longer loading ramp can really help with a larger or heavier bike. When the ramp is longer, there is less of a grade, making it a lot easier to roll your bike on it. You will also find you have more control over it as you are rolling it, since you will not have to put a lot of effort into pushing it "up hill" since the angle won't be as steep.
First prep the lift. Set up the front wheel vise so it is wide enough to accept the
 front wheel for when you have loaded the bike.
prep the lift set vise to proper width 

Next, lower the lift completely and secure the ramp to the lift.
lower lift table
secure ramp to lift

NOW, PREP YOUR CYCLE FOR THE LIFT 

Connect your soft straps to the handlebars of the bike.
attach soft straps to handlebars of bike 

Set up the ratchet straps so they are the right length and place them in
close proximity to the front wheel vise.

ratchet straps must be at right length and within reach of vise 

With the bike ready and the lift ready, slowly load the bike onto the ramp.
load bike on ramp to lift table 

We recommend using extra long ramps, especially if you have a longer / heavier bike,
as it makes the loading process a lot easier (see above for further explanation!).
Holding the front handlebars of the bike and secure the front wheel vise tightly.
hold handlebars and secure bike in vise tightly 

Next, attach one of your straps to the lift and then to the soft straps on the bike.

Tighten the strap until there is tension.

attach soft straps to bike 

Then repeat on the other side, making sure the straps are even, and the bike remains level. Tighten the straps enough to slightly compress the front forks of the bike.
Your bike is now secure on the lift.

Visit http://www.nhproequip.com/pro-2500-48-high-rise-air-utv-motorcycle-lift-free-shipping to watch a video of the bike upload process. Call Clark for more info at 603-234-2612. Visit Clark Heintz Tools & Equipment, LLC at 1298 Rte 3A in Bow, NH. In business for 43 years.